Additive Manufacturing, Collaboration Keep T-6Bs Flying

Story Number: NNS181011-14Release Date: 10/11/2018 3:11:00 PM
A  A  A   Email this story to a friend   Print this story
From Naval Air Systems Command Public Affairs

PATUXENT RIVER, Md. (NNS) -- The recent delivery of 15 T-6B Texan II dorsal assembly ribs in a matter of weeks is an example of how quickly stakeholders can increase readiness through collaboration and innovation.

“With additive manufacturing (AM), the fleet can now get the parts in a matter of hours in addition to having an additional source of production,” said Chief of Naval Air Training (CNATRA) Assistant Chief of Staff for Aircraft Readiness Capt. Thomas Gibbons. “Establishing this capability locally could also potentially save us effort and cost.”

CNATRA decided to replace the aircraft’s ribs after a series of regularly scheduled inspections of the T-6B.

“We believed our workforce had the skills to replace the ribs at the wing, instead of taking aircraft out of service to send them to a maintenance facility,” Gibbons said.  

The dorsal assembly extends from the aircraft’s rear fin toward its nose, helping provide directional stability during asymmetrical flight caused by external conditions such as crosswinds.

An initial request was sent to the Naval Undergraduate Flight Training System Program Office—which oversees T-6Bs—asking for additional instructions to the aircraft’s structural repair manual. CNATRA learned from the program office that it could not begin work immediately even if they were granted authority to conduct the repair; industry had to manufacture the ribs first.   

While waiting for a response, Gibbons spoke to the program’s primary air vehicle lead, John Myers, about the possibility of using AM to manufacture the ribs after hearing about its potential from Liz McMichael, Naval Air Systems Command’s (NAVAIR) AM/digital thread integrated product team (IPT) lead and director of innovation.

“I quickly realized AM could be used to produce the dorsal assembly ribs,” Gibbons said. “The brief described the amazing products that were produced using AM. I thought it was perfect to meet our need and even began to consider how it could be used for other requirements.”

Myers was also familiar with McMichael’s brief and engaged another stakeholder, the T-6B’s Fleet Support Team (FST), to begin the process.

McMichael is one of many experts integrating AM into Naval Aviation’s day-to-day activities. Her team is part of AIRWorks, a collection of teams within NAVAIR’s Naval Air Warfare Centers and Fleet Readiness Centers with capabilities to engineer, prototype, build, install and test one-time or low-volume production solutions.

She said Gibbons’ inquiry underscores the need to reach out to as many stakeholders as possible and let them know how AM can be used.

“There are 48 items pre-approved for printing so far. This means they don’t have to ask for an engineering disposition. Sailors and Marines can print what they need when they need it and use it for the purpose it was designed for,” McMichael said. 

Items not on the list, however, need to demonstrate their airworthiness before being approved for production and installation. They must undergo AM development, which involves maturing the technology and setting standards for printing.

In the case of the T-6B ribs, after they were identified as possible AM candidates by the Jacksonville Materials Laboratory in Florida, the AM/digital thread IPT and T-6B team modeled the ribs, created laser-scanned models, tested prototypes, developed an engineering data package and approved installation instructions as part of its work to demonstrate the parts’ airworthiness.   

Approximately 60 days after the initial inquiry, the ribs received approval for AM production.  Fifteen were printed and installed on T-6Bs at Naval Air Station (NAS) Whiting Field, Florida, and NAS Corpus Christi, Texas, and flew for the first time Aug. 1.

The entire process from request to installation took two months despite CNATRA, the program office and the OEM having limited experience with AM.

“The manufacture [of the dorsal assembly ribs] was reduced to a matter of hours and 10 percent of its original cost,” Myers said. “Now that it has been approved for use, requests for six more ribs have been submitted.”

McMichael said manufacturing the ribs exemplifies what is possible with AM and cross-functional teams.  

“The fleet and the program office saw AM as a possible solution and reached out to us,” she said.  “CNATRA, the program office, engineering, FST and the original equipment manufacturer all worked together to increase speed to the fleet and provide an additional source for dorsal assembly ribs.”


Get more information about the Navy from US Navy facebook or twitter.

For more news from Naval Air Systems Command, visit

Navy Social Media
Sign up for email updates To sign up for updates or to access your subscriber preferences, please click on the envelope icon in the page header above or click Subscribe to Navy News Service.