Official websites use .mil
Secure .mil websites use HTTPS
Fleet Readiness Center East (FRCE) continues to expand its support of naval aviation’s heavy lift mission with the recent induction of a CH-53K King Stallion engine, the first of its kind to undergo depot-level maintenance.
Following the first induction of a CH-53K King Stallion helicopter for maintenance at FRCE in April, the facility also inducted the platform’s first T408-GE-400 turboshaft engine for depot-level maintenance Sept. 9.
FRCE Engines Branch Head David Thorpe said this induction represents an important milestone in the depot’s support of naval aviation.
“Our Maintenance, Repair and Overhaul Production Department and Centralized Coordination Department have been working with the Fleet Support Team, the original equipment manufacturer and other entities for the past few years, and their efforts are beginning to be realized,” said Thorpe. “FRC East is now the only facility in the world who can perform depot-level maintenance on these engines. With this new capability, we can provide the fleet with restored and dependable T408 engine assets, which are much needed as the new CH-53K King Stallion helicopter program continues to grow.”
The T408 turboshaft engine powers the Marine Corps CH-53K King Stallion, the U.S. military’s largest and most powerful helicopter. As the heavy lift replacement for the CH-53E Super Stallion, the King Stallion will expand the fleet’s ability to rapidly move more material throughout the area of responsibility. Powered by three T408 engines, the King Stallion can carry 27,000 pounds at a mission radius of 110 nautical miles, almost triple the baseline of its predecessor and a maximum external lift of 36,000 pounds.
CH-53K Capability Establishment Lead Jeff Warren said the H-53 Heavy Lift Helicopters Program Office (PMA-261) has asked FRCE to follow a multi-phase plan to establish full repair capability on the engine, which allows FRCE to begin performing limited depot-level maintenance on the engine while continuing to develop new capabilities that will lead to more in-depth repairs. He said this induction represents the first phase of the multi-phase plan.
“Right now, we are doing what we can and what is needed to get engines back on the shelf for the fleet,” said Warren. “The phased approach allows us to learn more about the engine and develop the repair criteria we need as we move toward conducting more in-depth maintenance on it. We are currently in the repair phase, which consists of inducting engines with specific repair needs. We can disassemble an engine, replace worn and damaged parts with new ones, reassemble and test it.”
Warren said as FRCE gains more experience with the engine and establishes additional repair capabilities, the depot will move into the second and third phases of the plan. In these phases, FRCE will be able to completely overhaul the engine and its components.
“We are working to establish full repair capability on the T408,” said Warren. “That includes breaking the engine all the way down, piece by piece, and routing every part of it through our back shops for repairs. We will have the ability to repair and refurbish the parts, rather than having to replace them with brand new ones like we are doing now. Then each part and component will come back to the engine assembly shop, where the engine will be rebuilt and tested.”
In preparation for this induction, FRCE has completed multiple pilot repairs on the T408 engine and its components over the past few years to develop and refine repair processes, techniques and materials. Warren said during the pilot repairs, FRCE artisans and engineers worked closely with representatives from the original equipment manufacturer and the program management office to learn how to properly disassemble and reassemble the engine and perform maintenance procedures.
Mark Schexnayder, an engine mechanic who has participated in many of the pilot repairs on the engine, said he is excited to be working on the T408 and looks forward to learning more about the platform.
“We are learning to maintain the new equipment that the military is using so we can continue to support them and their mission for years to come,” said Schexnayder. “I love learning new things, especially when it means I can make more of an impact. Our support of the warfighter is very important, and I am proud to be there for them – from learning everything I can about this engine to now helping to maintain it.”
Warren said FRCE has also been developing a T408 engine test cell that will allow artisans to test an engine’s performance in a controlled environment before returning it to the fleet. Once certified for use, the test cell will play a critical role in ensuring the engine meets mission requirements and is safe for flight, he said.
“We are the only depot source of repair for T408 engines in the world, which means we are the only site capable of repairing the engines, which also includes testing,” Warren said. “This test cell will be another significant milestone for us. It will allow us to test the engines to make sure they are airworthy and able to support the mission.”
The T408 test cell is projected to be certified for use by the end of this year and will be used to test the engines during the multi-phase plan, Warren said. In addition to testing the engines after maintenance, he noted that the test cell will also be used to test engines before they are inducted to ensure they have been properly diagnosed and identify any additional repairs that may be needed.
“Testing the engine in the test cell prior to its induction allows us to acquire more in-depth data from the engine and learn more about it before breaking it down,” Warren said. “Pre-induction tests are conducted to verify that we are addressing the right problem with the engine before it’s inducted. For example, if there is a suspected leak in the engine, the pre-induction test allows us to pinpoint exact what is leaking and where it’s originating from. Additionally, these tests provide the opportunity to identify any other underlying issues that may not have been previously detected, which increases efficiency during the repair process.”
Once FRCE establishes full repair capability for this engine, it is set to represent a significant amount of the depot’s workload, according to Warren.
“Each King Stallion has three engines, which means we are eventually going to have a significant amount of these engines coming through here for depot-level rework,” said Warren. “As of right now, FRC East is projected to eventually induct more than 100 T408 engines per year after we establish full capability. We only did 36 T64 engines in 2024 for the CH-53E Super Stallion because that platform is sundowning.
“FRC East has worked the T64 legacy engines for many years – with the T408 being the engine set to replace the T64, this workload will keep our engine line running well into the future,” Warren continued. “In doing this, we are set up to continue to support the warfighter for decades to come, knowing this engine is going to be the future for heavy lift aircraft.”
Thorpe said this induction is just the beginning of the depot’s support of the CH-53K King Stallion. FRCE plans to establish capability on about 150 components and dynamic components for the King Stallion.
“This is just the tip of the iceberg,” said Thorpe. “We are still in the beginning stages of engine and component work for the T408, which will grow exponentially in the next few years. As the King Stallion continues to replace the CH-53E Super Stallion, we will see more and more of these engines and their components come through our shops, and more King Stallion aircraft in our hangars. We are proud to be able to provide the fleet with these initial rework services now but are excited to grow and make an even larger impact on fleet readiness in the future.”
FRCE is North Carolina's largest maintenance, repair, overhaul and technical services provider, with more than 4,000 civilian, military and contract workers. Its annual revenue exceeds $865 million. The depot provides service to the fleet while functioning as an integral part of the greater U.S. Navy; Naval Air Systems Command; and Commander, Fleet Readiness Centers.
Subject specific information for the media
Events or announcements of note for the media
Official Navy statements
Given by Navy leadership
HASC, SASC and Congressional testimony
Google Translation Disclaimer